How to Rebuild a Ryobi Battery: A few things you ought to consider

Just like everything else, a battery would soon deteriorate and lose its function. However, it is a different situation with a Ryobi battery. With this power tool battery, you can repair, replace, and rebuild its system for you to continually utilize it.

Check: The Best Ryobi Replacement Battery You Can Buy Now

Before planning on rebuilding your Ryobi battery, here are a few things you ought to consider:

Since it is considered to be a power tool battery, a Ryobi cell can produce up to 18 volts. A battery with high voltage capacity can be dangerous since it can leak poisonous fluids or explode if not handled properly.

A Ryobi 18v battery has extreme charge and discharge capacities. If you plan to replace these with cells having lower charge and discharge rates, it will result to overheating, explosion, or cell leakage. Also, other tools don’t seem to reach a full charging capacity with incompatible battery packs.

If you are interested in Ryobi battery compatibility, click the link to read.

You need to make sure that your charger can function well with new batteries. In most cases, they do, but you ought to make sure that it won’t take too much time and that a full capacity is achieved after every charging.

Here are the steps to do so:

You will be needing a wire cutter, screwdriver, solder, and soldering iron. You can also prepare a hot melt glue and a tape which you can use to put the batteries together.

By doing this, you need to unscrew six bolts at the bottom. After that, you gently yank the orange and black sections apart from each other.

If you have made your research, this will be an easy task for you. You first need to remove the batteries and determine the type of cells you have. You can replace them with those that have similar battery chemistry. Hence, you can use either Lithium-ion, NiMh, or NiCad batteries as replacements. The NiCad are the least expensive yet least effective batteries. If you want quality and long-term batteries, you can avail Lithium-ion cells at around $11 each. With these, you will only need five pieces to achieve 18 volts. Also, always remember to replace batteries with the ones they are compatible with. This means that you can’t replace Lithium-ion cells with NiCad ones since there are some wirings that do not work with other battery types.

As you put the batteries together, it is advisable to solder the ends of each battery to ensure that positive ends are directly connected to the center of negative ends. You can also use hot melt glue or tapes to firmly keep the batteries together. After securing your battery pack, you attach the thermistor to one of the cells. Assemble the black and orange covers again by putting back the screws.

You have to make sure that the entire procedure gives off good results. You can use high-end battery testers, or you can simply use your Ryobi battery in one of its tools. If your tools work, then it is a job well done. If not, you can simply troubleshoot other factors and do it all over again.