How to Properly Charge a Porter Cable Battery

Possessing your very own porter cable battery also means that you need to take care of it. To do that, you should make sure that it is well-handled from the moment it was purchased to the time of your current use. One important factor affecting the condition of your porter cable battery is your way of charging it. This affects not only the lifespan of your power tool battery but also its quality and effectivity.

What to do before using Porter Cable Battery

You may have purchased your porter cable battery online or from a store. Either way, upon receiving your product, you should do the following:

Make sure that all parts and accessories are present. You ought to check if both batteries and charger are delivered together. Otherwise, you can readily report to the company about the missing devices.
Make sure that there are no damages. Look for scratches and dents when inspecting your product. You can look for leakage and distortion in batteries and loose connection in cords.
Reading the instructions. Since every purchased product comes with a manual, you better not ignore it and read the entire document instead. By reading the instructions and safety precautions, you can understand more about your battery and charger and learn how to properly handle them.
Keep receipts, manuals, and warranties. This is helpful in times that problems occur among your products. These documents also serve as proofs of purchase when dealing with payment or product performance problems.

How to deal with the Porter Cable Battery

Before charging, you can first manage the battery’s condition, and here is how:

• Do not use your power tool battery on devices or charger incompatible to it. If you do, it might result in explosion or the destruction of both battery and charger.
• Always keep the battery in a cool and dry place. Make sure batteries are stored at air temperature.
• Dispose the batteries appropriately. Avoid burning or incinerating these since they produce toxic, repulsive fumes.

How to handle the charger cord

Charger cords are just as important as the batteries and chargers. So, here are the ways to properly use them:

• Yank the cord near the plug. Do not pull at its receptacle since it disconnects other wirings within.
• Place charger cords in locations it won’t be stepped on or tripped over.
• Refrain from repairing cords. It might do more harm than good.
• Minimize the use of extension cords. Only use them if necessary. If you want to use them outdoors, make sure that they’re designed for such location.

Here a few short tips that will guide you on what to do when charging:

1. Have batteries fully charged at first use.
2. Monitor the LED flashing in chargers.
3. Unplug the charger when charging is complete or will be left unattended.
4. Charge in a well-ventilated place and at the right temperature.
5. Charging Don’ts

Here is a list of habits and actions that could possibly ruin your charger and Porter Cable Battery when charging.

1. Do not charge a damaged battery or charger.
2. Do not leave the battery in the charger.
3. Do not expose the charger to water, snow, rain, or frost.
4. Refrain from fixing broken batteries and chargers on your own. Call the local service center instead.
5. Properly charging your batteries is a crucial task. Hence, you should keep the guides mentioned in mind. In the end, this ensures not only a longer battery life but also a maximized charging capacity.